Craftsmanship and Creativity

  • ABOUT

    this is who we are

  • GALLERY

    take a look

  • CONNECT

    see what's trending

  • BLOG

    stay connected

  • CONTACT

    check us out

INTRO

WHO WE ARE

Metallhaus is dedicated to fine craftsmanship and creativity, we aren't interested in mediocrity. Here we work with all types of metals in house. Specializing in custom sheet metal and chassis work we can build just about anything you have in mind.

Specializing In Custom Sheetmetal And Chassis Work.

GALLERY

take a look

TESTIMONIALS

listen to the buzz

  • To anyone considering using Metallhaus, We at Becker Automotive Design would like to offer our very highest recommendation. Metallhaus and the Wreesman brothers have performed creative, high skilled quality work for us for many years. Their work is terrific, only exceeded by their integrity. We will use them again in a heartbeat.



    To anyone considering using Metallhaus, We at Becker Automotive Design would like to offer our very highest recommendation. Metallhaus and the Wreesman brothers have performed creative, high skilled quality work for us for many years. Their work is terrific, only exceeded by their integrity. We will use them again in a heartbeat.


    ★ ★ ★ ★ ★

    Howard Becker

    CEO of Becker Automotive Designs, Inc.

  • I've brought projects to well-known shops with high profile builds and smaller shops, with lower rates, where the quality suffered. But I got lucky, when I finally discovered the guys at Metallhaus.Referred by a welder who was moving out of town, what started as a custom header/exhaust job for my 63' Corvette, turned into a full build and they ended up the shop I trust most and am most often impressed by. Metallhaus is that rarity, gifted craftsman who take pride in their work. They're straight and upfront about cost. Actual collaborators, who can guide a project but aren't heavy handed. Easy to communicate with, they won't agree to work just to take a job. They put the interests of the project and the customer, first.



    I've brought projects to well-known shops with high profile builds and smaller shops, with lower rates, where the quality suffered. But I got lucky, when I finally discovered the guys at Metallhaus.Referred by a welder who was moving out of town, what started as a custom header/exhaust job for my 63' Corvette, turned into a full build and they ended up the shop I trust most and am most often impressed by. Metallhaus is that rarity, gifted craftsman who take pride in their work. They're straight and upfront about cost. Actual collaborators, who can guide a project but aren't heavy handed. Easy to communicate with, they won't agree to work just to take a job. They put the interests of the project and the customer, first.


    ★ ★ ★ ★ ★

    Jesse Alba

    Los Angeles, CA

  • In March of 2013, Jilz Gluten Free began baking gluten free crackers in Ventura, CA. With no equipment available from the baking industry that would handle gluten free dough, we were required to modify existing equipment or design and build our own. We explained to Danny and Jake of Metallhaus what our needs were, and worked with them to manufacture custom equipment that would become the Jilz production line. Their attention to detail and quality of construction is superb, and shows the focus and pride that they put into every project that comes out of their shop.



    In March of 2013, Jilz Gluten Free began baking gluten free crackers in Ventura, CA. With no equipment available from the baking industry that would handle gluten free dough, we were required to modify existing equipment or design and build our own. We explained to Danny and Jake of Metallhaus what our needs were, and worked with them to manufacture custom equipment that would become the Jilz production line. Their attention to detail and quality of construction is superb, and shows the focus and pride that they put into every project that comes out of their shop.


    ★ ★ ★ ★ ★

    Jill and Ron Morris

    Founders and Owners of Jilz Gluten Free

  • Metallhaus has completed two vintage auto restorations for our family over the past several years. The work performed by Jake and Danny Wreesman has been top notch in quality, was made a high priority, and done with pride and knowledge. We would highly recommend Metallhaus for your fabrication and restoration needs.



    Metallhaus has completed two vintage auto restorations for our family over the past several years. The work performed by Jake and Danny Wreesman has been top notch in quality, was made a high priority, and done with pride and knowledge. We would highly recommend Metallhaus for your fabrication and restoration needs.


    ★ ★ ★ ★ ★

    Bill and Glenda Sampson

    Camarillo, CA

  • Jake and Danny of Metallhaus have been working on my cars and motorcycles for the past 4 years, and while their work is impeccable, their straightforward approach to the work is what always stands out to me.Jake specifically has been helping me construct a land speed racing chassis for a flathead Harley-Davidson, and over the past couple of years he has helped me blend the technology of the past with the design of the present, and has constructed and mounted sheet metal and controls to an 80 year-old frame that many wouldn't take the effort on. He is incredibly detail-oriented and precise, and has helped keep me safe as well as supporting my racing efforts. He's caught many flaws in my original plans and saved me time and money by doing his research and planning ahead of me. Good people and incredible craftsmen.



    Jake and Danny of Metallhaus have been working on my cars and motorcycles for the past 4 years, and while their work is impeccable, their straightforward approach to the work is what always stands out to me.Jake specifically has been helping me construct a land speed racing chassis for a flathead Harley-Davidson, and over the past couple of years he has helped me blend the technology of the past with the design of the present, and has constructed and mounted sheet metal and controls to an 80 year-old frame that many wouldn't take the effort on. He is incredibly detail-oriented and precise, and has helped keep me safe as well as supporting my racing efforts. He's caught many flaws in my original plans and saved me time and money by doing his research and planning ahead of me. Good people and incredible craftsmen.


    ★ ★ ★ ★ ★

    Scott Toepfer

    Ventura, CA

  • I have been going to Metalhaus for fabrication and problem solving needs for the past 5 years. They have repaired gas tanks, fenders, bent handlebars, etc, etc..., fabricated parts that were collectively designed between myself and them, and figured out how to fix issues that had left me stranded. They have always stood by their work, and never done anything for me that was not absolutely top notch. I highly recommend them for any fabrication or design work. I truly feel that there is nothing they can't do, the best way that it can be done.



    I have been going to Metalhaus for fabrication and problem solving needs for the past 5 years. They have repaired gas tanks, fenders, bent handlebars, etc, etc..., fabricated parts that were collectively designed between myself and them, and figured out how to fix issues that had left me stranded. They have always stood by their work, and never done anything for me that was not absolutely top notch. I highly recommend them for any fabrication or design work. I truly feel that there is nothing they can't do, the best way that it can be done.


    ★ ★ ★ ★ ★

    Ryan Cox

    Los Angeles, CA

TEAM

 what we are made of

Danny Wreesman

With 20 years of experience in welding, fabrication, racing, and mechanics I will assure your project receives the highest level of attention and quality. If it’s not good enough to put my personal name on it then it’s not good enough for our customers.

jake Wreesman

Co owner and craftsman Jake Wreesman, has been working with his hands developing, honing, and mastering his skills for over 25 years. With 18 years of experience with welding and metal fabrication, he has directed these skills toward chassis and body design/fabrication.
“We do thorough, high quality work and have no desire to do anything less.” –Jake Wreesman

CONNECT

see what's trending

HOURS

Monday

9:00AM - 5:00PM

Tuesday

9:00AM - 5:00PM

Wednesday

9:00AM - 5:00PM

Thursday

9:00AM - 5:00PM

Friday

9:00AM - 5:00PM

Saturday

By Appointment Only

Sunday

By Appointment Only

CONTACT US

keep in touch

Metallhaus

2747 Palma Drive,

Ventura, CA 93003

Phone. 805-535-4344

Email. danny.metallhaus@gmail.com